- SKU: WGm21-29.7A
- BARCODE:
- VENDOR: Duraluxe
A4 Duraluxe Panels
Shipping calculated at checkout.
Couldn't load pickup availability
Guaranteed Safe Checkout
Description
Press your artwork directly onto the Duraluxe A4 panel (210×297 mm), a frameless metal blank for dye-sublimation. A solvent-free, VOC-free coating on a non-flammable panel. Eight finishes on offer: Glossy, Matte, Satin, Canvas, Ice Touch, Salt Lake, WallSky and Glow. Resists scratches and graffiti; acrylic spray paint lifts off with ethyl alcohol.
- Its core is 1.2 mm / 0.047" architectural aluminium, a thicker gauge than usual.
- Can be sheared and drilled before or after decoration.
- Hand-bendable once printed, without any tooling.
- Polymer powder-coating protects the image from UV for long-lasting colour.
- Five-year outdoor warranty on Glossy, Matte, Satin and Canvas; use Ice Touch, Salt Lake and Glow indoors.
Hang it in a hallway cluster or lean it on a shelf: A4 is a versatile everyday print size. Every A size shares the same √2 ratio, keeping designs consistent across the range.
| Material | Architectural-grade aluminium |
|---|---|
| Thickness | 1.2 mm (0.047") |
| Format | A4 — DIN A-series |
| Finishes | Glossy, Matte, Satin, Canvas, Ice Touch, Salt Lake, WallSky, Glow |
| Use | interior & exterior (finish-dependent) |
| Process | Dye-sublimation |
| Warranty | 5-year outdoor UV (Glossy, Matte, Satin, Canvas) |
Material
Sublimation-grade aluminium composite panel.
- Durable metal print surface with vivid, long-lasting colours
- Scratch, water, UV and anti-graffiti resistant
- Non-flammable and antimicrobial
- Suitable for indoor and outdoor use
- Available in multiple finishes: matte, glossy, satin, canvas and more
Care
Duraluxe panels are built to last.
- Wipe clean with a soft, damp cloth — no special cleaners needed
- Scratch, water and UV resistant surface
- Avoid abrasive pads or harsh solvents, especially on textured finishes
- Suitable for indoor and outdoor use
How to Sublimate
Duraluxe Panel Preperation:
- Remove the white protective film from the panel
- Make sure surface is free of lint and dirt
- You may use alcohol to clean surface
- Make sure panel is dry before applying transfer paper
Pressing Instructions:
- Preheat heat press by cycling the press two times to warm up the base
- Place a Nomex or similar heat felt on top of rubber base
- Place a clean sheet of paper to cover felt to protect
from excess ink gas during sublimation process - Place Duraluxe Panel with transfer face down on top of
protective paper - Place clean paper or heat fabric on top of panel to
protect from heat platen surface during pressing - Check temperature is set for 196C/385F
- Press time is set for 120 seconds (adjust time depending on your heat press)
- Pressure is medium or 60 psi
- Press the panel
- Remove protective paper from back of panel
- Lift panel from press careful with heat gloves
- Remove transfer paper and place panel face up on a cooling table or rack
Standard delivery within 2–5 business days
Scratch, UV and water resistant, built to last
